Activity2: Item rates for installation & commissioning of transformer

By -

Installation & Commissioning of 315 KVA dry type transformer

Schedule of quantity

Note: This schedule of quantity is for providing an idea regarding item specifications during the execution of the above work. Rates are subjected to vary from time to time. 


Sl.
No.
Description of item
Unit
Quantity
Rate
 (Rs)
Amount
(Rs.)
1
Removal of transformer yard fencing by carefully removing the nut bolts etc., Decommissioning of the existing 630 KVA, 11/0.4 kV oil transformer and shifting of transformer from the platform to the safe area within substation according the instructions of engineer in charge.
job
1
7,500/-
7,500/-
2
Shifting of the 315 KVA, 11KV/433 V Cast Resin Dry type transformer from substation area to platform including locking of transformer wheels and re-fixing the fencing to original condition etc as directed by the engineer incharge.
job
1
5,000/-
5,000/-
3
Installation & commissioning of new 315 KVA Cast Resin Dry type transformer in accordance with IS 10028 - Code of practice for Installation & maintenance of transformer including Pre commissioning tests and earthing of neutral and body of transformer etc. complete as directed by the engineer incharge..
job
1
20,000/-
20,000/-
4
Arrangement of temporary power supply during changing of transformer. (630 KVA transformer with a load demand of 240 KVA)
Day
3
3,000/-
9,000/-

Total
41,500/-

Comments

Post a Comment

Popular posts from this blog

Multiple Choice Questions in Power Electronics - 1

By -
  Important multiple choice questions from Power Electronics 1.       Which one of the following statements is not correct? a)       Power MOSFETs are so constructed as to avoid punch through. b)       In a power MOSFET, the channel length is relatively large and channel width is relatively small c)       Power MOSFETs do not experience any minority carrier storage d)       Power MOSFETs can be put in parallel to handle large currents 2.       Which one is most suitable power device for high frequency (>100 kHz) switching application? a)       Power MOSFET b)       BJT c)       Schottky diode d)       Microwave transistor 3.       A thyristor equivalent of thyratron tube is a)...
Read more

Multiple Choice Questions on Power System - 3

By -
Important multiple choice questions on power system 1.        A line trap in carrier current relaying tuned to carrier frequency presents A)      High impedance to carrier frequency but low impedance to power frequency B)       Low impedance to both carrier and power frequency C)       High impedance to both carrier and power frequencies D)      Low impedance to carrier frequency and high impedance to power frequency 2.        The use of fast acting relays and circuit breakers for clearing a sudden short circuit on a transmission link between generator and the receiving end bus improves the transient stability of the machine because A)      Short circuit current becomes zero B)       Post-fault transfer impedance attains a value higher than that during the fault C)  ...
Read more

Multiple Choice Questions on Power Systems - 5

By -
Important multiple choice questions on power systems 1.        Which one of the following statements is true? A)      Steady state stability limit is greater than transient state stability limit B)       Steady state stability limit is equal to transient state stability limit C)       Steady state stability limit is less than the transient stability limit D)      No generalisation can be made regarding the equality of otherwise of the steady state stability limit and transient stability limit 2.        If the integral control of a single area system, when  the system frequency error is reduced to zero A)      The integrator output and the speed changer position attains a constant value B)       The integrator output increases but the speed changer position also comes dow...
Read more